사용자 도구

사이트 도구


international_journal

International Journal

  1. Yun Jung Lee and Zeungnam Bien, “A Hierarchical Strategy of Planning Crab Gaits for a Quadruped Walking Robot,” Journal of Robotica, Vol. 12, pp. 23 - 31, 1994.
  2. Yun-Jung Lee and Shigeo Hirose, “Three-Legged Walking for Fault-Tolerant Locomotion of Demining Quadruped Robots,” Advanced Robotics, Vol. 16, No. 5, pp. 415-426, 2002.
  3. Yun-Jung Lee and Zeungnam Bien, “Path Planning for a Quadruped Robot: An Artificial Field Approach,” Advanced Robotics, Vol. 16, No. 7, pp. 609-628, 2002.
  4. Seung-ha Lee, Yun-Jung Lee, Kwang-Hyun Shim, and Zeungnam Bien, “Adaptive Fuzzy Control of Yo-yo System Using Neural Network,” International Journal of Fuzzy Logic and Intelligent Systems, Vol. 4, No. 2, pp. 161-164, 2004.
  5. Byung-Jun Choi, Yun-Jung Lee, and Bong-Yeol Choi, “Fast Preisach modeling method for shape memory alloy actuators using major hysteresis loops,” Smart Materials and Structures, Vol. 13, No.5, pp. 1069-1080, October, 2004.
  6. Ick Hwan Kim, Jae Seung Choi, Yun-Jung Lee, Jae Yeal Nam, and Yeong Ho Ha, “Design and Implementation of Multimedia Functional Module for Digital TV,” IEEE Trans. on Consumer Electronics, Vol. 50, No.3, pp. 962-967, August, 2004.
  7. Tae-Hyun Nam, Cheol-Am Yu, Yun-Jung Lee, and Yinong Liu, “Fabrication of Ti-Ni alloy for proportional control,” International Journal of Applied Electromagnetics and Mechanics, Vol. 23, No. 1-2, pp. 9-15, July, 2006.
  8. Yun-Jung Lee, Hyung-Min Son, Jun-Bum Gu, and Tae-Hyun Nam, “Design and control of multi-step SMA actuator,” International Journal of Applied Electromagnetics and Mechanics, Vol. 23, No. 1-2, pp. 119-124, July, 2006.
  9. Cheol-am Yu, Gyu-bong Cho, Tae-yeon Kim, Yun-jung Lee, and Tae-hyun Nam, “The three-stage B2-R-B19-B19' and shape memory characteristics in Ti-Ni-Cu-Fe alloys,” Materials Science & Engineering, pp. 500-503, December, 2006.
  10. Sehoon Park and Yun-Jung Lee, “Discontinuous zigzag gait planning of a quadruped walking robot with a waist-joint,” Advanced Robotics, Vol. 21, No. 1–2, pp. 143–164, 2007.
  11. Tae-hyun Nam, Cheol-am Yu, Yun-Jung Lee, and Yinong Liu, “Functionally Graded Ti-Ni Shape Memory Alloys,” Materials Science Forum, Vols. 539-543, pp. 3169-3172, March, 2007.
  12. Jung-min Nam, Jae-hwa Lee, Yun-Jung Lee, and Tae-hyun Nam, “Cooling and Heating Characteristics of Ti-Ni Based Shape Memory Alloy Wire Actuators,” Solid State Phenomena, Vols. 124-126, pp. 1649-1652, June, 2007.
  13. Jun-Uk Chu, Inhyuk Moon, Yun-Jung Lee, Shin-Ki Kim, and Mu-Seong Mun, “A Supervised Feature-Projection-Based Real-Time EMG Pattern Recognition for Multifunction Myoelectric Hand Control,” IEEE/ASME Transactions on Mechatronics, Vol. 12, No. 3, pp. 282-290, June, 2007.
  14. J. I. Kim, T. H. Nam, Y. J. Lee, and S. Miyazaki, “Effect of annealing on shape memory characteristics of Ti-50.85at.%Ni Alloy,” Functional Materials Letters, Vol. 1, No. 3, pp. 209-213, December, 2008.
  15. Jong-Moon Choi, Hyung-Min Son, and Yun-Jung Lee, “Biomimetic variable-focus lens system controlled by winding-type SMA actuator,” Optics Express, Vol. 17, No. 10, pp. 8152-8164, May, 2009.
  16. Hyung-Min Son, Min Young Kim, and Yun-Jung Lee, “Tunable-focus liquid lens system controlled by antagonistic winding-type SMA actuator,” Optics Express, Vol. 17, No. 16, pp. 14339-14350, August, 2009.
  17. Jun-Uk Chu and Yun-Jung Lee, “Conjugate-Prior-Penalized Learning of Gaussian Mixture Models for Multifuction Myoeletric hand Control,” IEEE Transaction on Neural Systems and Rehabilitation Engineering, Vol. 17, No. 3, pp. 287-297, June, 2009.
  18. Hyung-Min Son, Chul-Gon Tak, Seok-Won Kang, Jae-Il Kim, Tae-Hyun Nam, and Yun-Jung Lee , “Design and control of linearity-enhanced SMA actuators,” Phys. Scr. 2010 014059, May, 2010.
  19. Seung-Young Yang, Seok-Won Kang, Yeon_Min Lim, Yun-Jung Lee, Jae-Il Kim, and Tae-Hyun Nam, “Temperature profiles in a Ti-45Ni-5Cu(at%) shape memory alloy developed by the joule heating,” Journal of Alloys and Compounds, Vol.490, pp. L28-L32. 2010.
  20. Jun-Uk Chu, Inchan Youn, Kuiwon Choi, and Yun-Jung Lee, “Human-Following Robot using Tether Steering,” INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING Vol. 12, No. 5, pp. 899-906, October, 2011.
  21. Jun-Uk Chu, Dong-Hyun Jeong, Inchan Youn, Kuiwon Choi, and Yun-Jung Lee, “Myoelectric Hand Prosthesis with Novel Adaptive Grasping and Self-locking,” INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING Vol. 12, No. 6, pp. 1095-1103, December, 2011.
  22. Bumhwi Kim, Hyung-Min Son, Yun-Jung Lee, and Minho Lee, “ Implementation of Face Selective Attention Model on an Embedded System, ” ICONIP(Neural information Processing) 2012, Part V, Lecture Notes in Computer Science, Vol. 7667, pp 188-195, November, 2012.
  23. Hyun Duk Seo, Sung Su Ahn, Joong Cheol Yoon, and Yun-Jung Lee, “KisBot III: New Spherical Robot with Wind-Driven Driving Mechanism,” Applied Mechanics and Materials, Vol. 281, pp. 33-36, January, 2013.
  24. Su Ho Park, Jun Hee Lee, Tae Hyun Nam, Yun Jung Lee, Kenji Inoue, Su Woong Lee, Jae Il Kim, “Effect of proportional control treatment on transformation behavior of Ti-50.9at.% Ni shape memory alloys,” Journal of Alloys and Compounds Vol. 577S (S: Supplement), pp. S168-S174, November, 2013.
  25. Sung-Su Ahn and Yun-Jung Lee, “Novel Spherical Robot with Hybrid Pendulum Driving Mechanism,“ Advances in Mechanical Engineering pp. 1-14, November, 2014.
international_journal.txt · 마지막으로 수정됨: 2016/10/17 09:58 저자 wlgns5220